Eagle Brush & Chemical, Inc.

Tips & Tricks…

Make stripping less time intensive by following these two easy steps:

1. QUANTITY: Have enough stripping solution on the floor to “float” or carry the multiple coats of floor finish you are removing. As the finish breaks down and turns back into a liquid it needs a place to go. You need enough stripper on the floor to carry it and to keep it from settling back down on the floor. If this happens, a second, more difficult, stripping job will be needed.

2. TIME. Give your stripper time to do its job. Allow the stripping solution at least 10 minutes to penetrate the layers of floor finish before scrubbing. This will ultimately mean less time spent on your stripping job.

Shurkleen 

An industrial strength, highly concentrated stripper that should be diluted at 4 ounces per gallon of water for most stripping jobs. The low, controlled foam makes it ideal for use with rotary floor machines where foam can often be a problem.

Super S

A product for the heaviest of build-up problems or where multiple coats of finish would require repeated stripping. This strong, ammoniated stripper gives you that extra punch when you need it most. It is a blend of detergents, solvents and alkaline builders that penetrates heavy accumulations quickly.

Shurkleen II

Strong ammonia substitutes do the job of ammonia without the unpleasant fumes and odor. This powerful stripper quickly penetrates to removes today’s durable finishes. As little as 4 ounces per gallon of water will handle most jobs. This product contains no harsh chemicals that can burn the floor.

E-Z Strip

This product is a highly concentrated, non-ammoniated industrial strength stripper. The powerful detergents and water soluble solvents combine to produce a formidable cleaner for removing heavy accumulations of wax and finish, grease and dirt.

Brawny –  Heavy Duty Professional Stripper

This non-ammoniated stripper was developed specifically for difficult stripping operations where other strippers fail. Use for quick removal of multiple coat build-ups, old and/or extremely hard, over burnished films.

Wipe Out

A floor finish re-emulsifier that dissolves old floor finish quickly and effortlessly without the use of floor machines, floor pads or other floor stripping equipment. This material works by chemically dissolving the film so that it may be vacuumed up or picked up with a mop. No rinse is required. Simply allow the floor to dry thoroughly and re-apply the finish.

Zip Strip EP (DFE Green Certified)

An environmentally preferred, rinse free stripper that works quickly to remove multiple coats of finish with a single application. Removes traditional seals and finishes as well as “green” products.

Effortless

A unique, ready to use stripper designed for the removal of severe finish and seal build-up from all types of flooring. Use on build-up along walls, in corners, on stairs and baseboards, under ledges and in other limited access areas. This thick material is ideal for use as a pre-treatment to regular stripping operations or as a detail/spot stripper.

Seal Strip

A ready to use blend of liquid solvents designed for removing solvent based seals from masonry surfaces such as brick, concrete, terrazzo, quarry tile and other similar surfaces as well as wood surfaces.